Following the shower pan membrane is within place, then your wall boards continue the walls. This is the right order... the lining membrane and just then your wall boards. The very best practice for building shower walls is applying cement board. Here's how you're doing so...
The lining membrane is installed right on the sloped mortar layer after which sealed to the bottom of the tile shower drain. Then your lining operates up the wall from the studs. That provides a waterproof lining that's in the walls several inches over the height from the curb. After the lining is within place would you install the boars for that wall.
It's board too, as with cement boards. That is because cement boards will not rot and work nicely around water. Prior to the boards continue though, there's another essential step.
From the studs and prior to the wall boards, use a moisture barrier. That's either 15# roofing felt or 4 mil plastic sheet. This way the moisture that may fall behind the cement boars is limited with that layer. Then you definitely install the cement boards.
To construct a wall correctly, leave gaps between boards after which tape and dirt the joints to make a real sealed wall.
Another spot to watch is the foot of the cement boards. Install it's so there's a minimum of singleOr2 inch gap between the foot of the cement board and also the lining sheet itself? Why???
That gap would be to reduce the risk of water wicking up in to the cement board. Wet cement boards will not rot however they will mold. That's not good.
The shower pan membrane is paramount to some tile shower that actually works correctly. Obtaining the wall covering within the shower installed happens following the lining membrane is within place. Using the materials available, it's not hard to develop a shower that keeps water in the best place in the floor completely in the walls.
You will find other particulars which will make the shower walls continue for a very long time trouble-free...
No comments:
Post a Comment